Masonry Contractors
Compare 338 masonry contractors across 50 states — averaging 4.9★ from 17,938 verified Google reviews. Pick your state to see local firms with ratings, service areas, and licensing rules. No lead fees.
Masonry contractors build and repair brick, block, stone, and concrete-masonry structures, from foundations and walls to fireplaces, chimneys, and hardscape. Masonry runs $10 to $30 or more per square foot installed; it is skilled, durable work where the mortar and flashing details decide longevity.
Masonry Contractors by State
How to Hire Masonry Contractors in 2026
Ask to see recent work in the same material, since brick, natural stone, and block each demand different skills. Confirm the mason addresses drainage, flashing, and weep holes on walls, because trapped water is what cracks and spalls masonry over time. For structural or retaining work, licensing and engineering may be required.
Get a written scope with the exact units, whether brick type, stone, or block, plus mortar type and reinforcement. Repointing and repair work should specify matching mortar color and profile. Because masonry is labor-intensive and permanent, vet craftsmanship carefully and tie payment to completed, inspected sections.
Masonry Contractors FAQs
How much does masonry work cost?
Masonry runs roughly $10 to $30 or more per square foot installed, depending on material and complexity. A brick or stone veneer wall, chimney rebuild, or stone patio each vary widely: a chimney repair might run $1,500 to $5,000, while a full stone facade runs into the tens of thousands.
Do masons need a license?
It varies by state: structural masonry and retaining walls are more likely to require a specialty or general contractor license and permits, while veneer and repair work may not. Confirm licensing for structural work and insurance in every case, given the weight and permanence of the material.
What is repointing and when is it needed?
Repointing, also called tuckpointing, replaces deteriorated mortar joints without rebuilding the masonry. It is needed when mortar is cracked, crumbling, or receding, typically every few decades. Matching the original mortar's strength, color, and joint profile is essential; over-hard modern mortar can damage old brick.
Why does brick or stone crack and spall?
The usual causes are water intrusion, freeze-thaw cycles, missing flashing or weep holes, and foundation movement. Proper drainage details, correct mortar, and flashing prevent most damage. Spalling brick often signals a moisture problem that should be diagnosed before cosmetic repair.
Directory refreshed April 2026. Listings sourced from public business data; confirm licensing and insurance directly with each firm.