FireproofingSuppliers, Distributors & Wholesalers

Spray-applied fireproofing is a narrow, specification-driven channel. Two manufacturers dominate sprayed fire-resistive material (SFRM): GCP Applied Technologies with Monokote and Isolatek with Cafco, and both sell through a short list of specialty distributors to applicator subcontractors, many of whom hold manufacturer training credentials. Intumescent coatings for exposed steel follow paint-industry channels through companies like Sherwin-Williams and PPG alongside the SFRM makers. GCs never buy this material themselves; they buy an installed system from an applicator, because the product, the UL design, and the application equipment are inseparable. Board and wrap systems for joints and ducts move through commercial drywall distributors.

SFRM sells by the bag, with coverage math expressed in board feet per bag at a given thickness and density, and installed pricing quoted per square foot of protected steel at the thickness each UL design requires. Intumescent coatings price per gallon with dramatically higher material cost but a thin, paint-like finish. Applicators buy on net-30 distributor accounts with project pricing on bag counts in the thousands. Material pricing has moved up moderately into 2026 with gypsum and cement inputs, while intumescent products carry the steeper increases, reflecting resin costs and booming demand from exposed-structure architecture and mass timber projects.

Vetting in fireproofing means vetting the applicator and the paperwork chain together: confirm the sub is trained or approved by the manufacturer whose product is specified, that the exact UL or Intertek design numbers for your assemblies appear on the submittals, and that thickness and density testing will be documented per AWCI Technical Manual 12-A for the special inspector. Substituting products between bid and buyout requires re-approval against every listed design, so lock that early. Ask suppliers about regional stock depth during winter heating season, bond-test requirements over primed steel, and patch-material availability for the trades who will inevitably knock spray off beams.