Concrete Contractors
Compare 469 concrete contractors across 51 states — averaging 4.9★ from 102,106 verified Google reviews. Pick your state to see local firms with ratings, service areas, and licensing rules. No lead fees.
Concrete contractors pour and finish foundations, slabs, driveways, and patios. Flatwork runs about $6 to $12 per square foot for a basic broom finish, with stamped or colored concrete $12 to $20 or more; the quality of prep and finishing decides whether it cracks in five years or lasts thirty.
Concrete Contractors by State
How to Hire Concrete Contractors in 2026
Ask about base preparation and reinforcement, because a proper gravel base, compaction, and rebar or wire mesh matter more than the concrete itself. Confirm the mix strength, typically 3,000 to 4,000 PSI for residential flatwork, and that control joints will be cut to manage cracking. Reputable crews will not pour in freezing temperatures without protection.
Get the scope in writing including thickness, base, reinforcement, finish, and joint spacing. Concrete is unforgiving once cured, so vet the crew's finishing work by visiting a recent job. Expect a deposit for materials, but hold meaningful payment until the pour is complete and you have inspected the finish and joints.
Concrete Contractors FAQs
How much does concrete work cost?
Basic concrete flatwork runs $6 to $12 per square foot installed, including base prep and finishing. Stamped, colored, or exposed-aggregate finishes run $12 to $20 or more per square foot. A typical two-car driveway costs $4,000 to $10,000 depending on size, thickness, and finish.
Do concrete contractors need a license?
Requirements vary by state: some license concrete work under a specialty or general contractor license, others do not require a state license for flatwork. Structural work such as foundations is more likely to require licensing and permits. Confirm insurance regardless.
Why does concrete crack, and can it be prevented?
Some hairline cracking is normal as concrete cures, but major cracks usually trace to poor base prep, inadequate reinforcement, missing control joints, or pouring in bad weather. Proper compaction, rebar or mesh, correctly spaced control joints, and curing time prevent most structural cracking.
How long before I can use new concrete?
You can usually walk on new concrete after 24 to 48 hours and drive on it after seven days, but full strength takes about 28 days. Ask your contractor for specific cure times before parking vehicles or placing heavy loads.
Directory refreshed April 2026. Listings sourced from public business data; confirm licensing and insurance directly with each firm.